Produkte

1 + 6 bobbins ø 560 mm (22”), 1000 or 700 rpm

1 + 6 bobbins ø 630 mm (24,8”), 900 or 600 rpm

1 + 6 or 1 + 9 bobbins ø 710 mm (27,9”), 800 rpm / 600 rpm

1 + 12 bobbins ø 630 mm (24,8”) DIN or 30” MOSSBERG, 350 rpm

1 + 6 bobbins ø 560 mm (22”), 1800 rpm

1 + 6 bobbins ø 630 mm (24,8”), 1400 rpm

1 + 3 bobbins ø 900 mm (35,4”), 500 rpm

1 + 3 bobbins ø 1250 mm (49,2”), 500 rpm

1 + 3 bobbins ø 1600 mm (63”), 400 rpm

each 20 single pay-offs 400 mm (15,8”) and rotating take-up 850 mm (33,5”), for production of...

Rotating take-up for drum twister lines, for reel flange ø 2500 mm (98,4”), combined with new...

three discs longitudinal movable, middle disc tiltable

4 rotating pay-offs 2000 mm (78,7”), sector correcting system, tensioning device for armouring...

hanging design in one common frame, for reel flange ø 1600 mm (63”)

2 belts, contact length 2000 mm (78,7”)

reel flange ø 1600 – 3000 mm (63 – 118,1”), separate DC-drive

contact length 650 mm (25,6”) – ideal for drum twister lines

for 2 pads ø 600 mm (23,6”), 500 rpm, available from stock

concentric taping heads, pad outer ø 500 mm (19,7”), pad inner ø 200 mm (7,87”), max. 1200...

QUEINS, tangential-type steel taping head, type QST 2 x 800, for 2 pads ø 800 mm (31,5”), 400...

for 2 pads ø 600 mm (23,6”), 750 rpm, DC-drive, available from stock

for “jumbo”-coils, pad outer ø 500 mm (19,7”), width 500 mm (19,7”), up to 160 kg (350...

useful content 200 l, drive motor 70 / 140 HP

Cold mixer, type FM 150, useful content max. 100 l

PVC planetary compounding extruder

screw ø 60 mm (2,36”), L/D = 20

screw ø 152 mm (6”), L/D = 20

for CCITT-coaxial cables, at 30 m /min (98,4 ft/min) wire ø 2,2 mm (0,08”), inner insulation...

for bobbin flange ø 500 mm (19,7”)

with pumps and tools, for cable ø up to 78 mm (3”)

bobbin flange ø 390 mm (15,4”), V = max. 13 m/sec (42,6 ft/sec), for wires ø 2,0 – 4,7 mm...

take-up bobbin ø max. 500 mm (19,7”), speed max. 700 m/min (230 ft/min)

for bobbin flange ø 500 mm (19,7”)

bobbin flange ø 508 mm (20"), max. 2500 m/min (8200 ft/min)

for bobbin flange ø 500 mm (19,7”), 2000 m/min (6560 ft/min)

48 bobbins ø 315 mm (12,4”)

bobbin disposition for loading by line, bobbin size ø 630 mm (24,8”) DIN, possible line...

12 + 18 + 24 bobbins ø 800 mm (31,5”) with semi-automatic loading system

cages for 6 + 12 + 18 + 24 + 30 + 36 + 42 bobbins ø 560 mm (22”) flange, reduced line length...

bobbin ø 500 mm (19,7”), complete line with taping heads 8 x 500 mm (19,7”), caterpillar...

bobbin ø 550 mm (21,7”), complete line with taping heads 8 x 500 mm (19,7”), caterpillar...

pad ø 300 mm (12”), 1400 rpm, tape width max. 40 mm (1,6”), PIV-gearbox

for 2 pads ø 300 mm (12”), max. 500 rpm

ø 190 mm (7,5”), 2 units available

Tangential taping head for 2 pads ø 400 mm (15,8”), 600 rpm (2 units available)

for bobbins / copse ø 180 mm (7”), length 140 mm (5,5”), 3000 rpm

for bobbins ø 500 mm (19,7”), overall width 305 mm (12”)

for reel flange ø 1200 mm (47”), max. 600 m/min (1970 ft/min) - ideal for extrusion lines,...

cantilever type, range of reels: 560 – 1000 mm (22 – 39,4”), 800 – 1600 mm (31,5 - 63”)...

for reels up to ø 3200 mm (126”), max. 20 tons load, available from stock

for reels ø up to 2600 mm (102,4”), max. 10 tons load, available from stock

reel flange ø max. 1800 mm (71”), weight 6 tons, available from stock

reel flange ø max. 3200 mm (126”), weight 10 tons

reel flange ø max. 3600 mm (141,7”), weight 35 tons, available from stock

for reel flange ø up to 3000 mm (118,1”), max. 15 tons

for reel flange ø 700 - 2140 mm (27,5 – 84”), max. 8 tons

with two carriages each 9 tons, reel flange ø max. 2150 mm (84,6”)

for reels up to ø 2500 mm (97“), max. 12 tons

for reel weight up to 230 tons, 5000 mm flange ø (197”), 2 winding motors

for steel wire ø 18 – 8 mm (0,71 – 0,32”), for coils up to 500 kg

for reels flange ø 560 – 1000 mm (22 - 39,4”), max. 2 tons

cantilever type, range of reels: 560 – 1000 mm (22 – 39,4”); 800 – 1600 mm (31,5 - 63”)...

for reels up to 2600 mm (102,4”), max. 10 tons

for reels up to 3200 mm (126”), max. 20 tons

for reel flange ø 1800 mm (71”), max. 6 tons

for reel flange ø 2500 mm (98”), max. 10 tons, available from stock

for reel flange ø 3600 mm (141,7”), max. 23 tons

model PPO 3000, for reel ø up to 3000 mm (118,1”), max. 15 tons

for reel ø up to 4500 mm (177”), max. 25 tons

for reel ø up to 2140 mm (84”), max. 8 tons

for reel ø up to 2500 mm (98,5”), max. 12 tons

contact length 800 mm (31,5”), 3 units available

ø 450 mm (17,7”)

clamping length 880 mm (34,6”), haul-off force max. 800 kg

clamping length 1180 mm (46”), haul-off force max. 1200 kg

clamping length 1480 mm (58”), haul-off force max. 1500 kg

clamping length 1760 mm (69”), haul-off force max. 1500 kg

clamping length 2140 mm (84”), haul-off force max. 2000 kg

clamping length 2800 mm (110”), haul-off force max. 5000 kg, for horizontal or vertical...

Belt type capstan PQC 7500, contact length 4670 mm (183,9“), max. cable-ø 280 mm (11“),...

4-belt-design, contact length 5000 mm (157”), haul-off force max. 12000 kg, product ø up to...

Discs ø 800 mm (31.5")

disc ø 1000 mm (39,4”), multispeed gearbox or DC-/AC-drive

disc ø 1200 mm (47”), multispeed gearbox or DC-/AC-drive, available from stock

disc ø 1600 mm (63”), multispeed gearbox or DC-/AC-drive

testing height 0 – 560 mm (0 – 22”)

contact length 240 mm (9,5”) or 800 mm (31,5”)

contact length 650 mm (25,6”) – ideal for drum twister lines

block ø 550 mm (21,6")

block ø 600 mm (23,6"), 1,25 tons pulling force

2 dies, block ø 400/328 mm (15,7/12,9”), reduction 18,5 %, max. pull 850 kg

for bobbins max. ø 250 mm (10")

shaft-type, bobbin flange ø 900 mm (35,4"), o. a. w. max. 600 mm (19,7"), bore 200 mm...

bobbin flange ø 390 mm (15,4"), speed max. 13 m/sec (42,6 ft/sec), for wires ø 2,0 - 4,7...

for copper wire ø 3,5 mm (0,138"), ø 3 mm (0,12") for steel wire

application range 10 - 45 mm (0,4 - 1,77")

bags 1-2 tons, 2000 l capacity

with REIFENHÄUSER extruder ø 25 mm (1”), rotating crosshead

pad ø 800 mm (31,5”), width max. 120 mm (4,7”)

bobbin ø 560 mm (22”) with string brake

for up to 68 bobbins ø 400 mm (15,8”) flange

600 plastic bobbins
flange ø 450 mm (17,7“)
overall width 280 mm (11“)
bore 25,9 mm (1“)

bar strander for closing of steel ropes, copper and aluminium conductors, max. 90 rpm, reels ø...

bobbin ø 550 mm (21,7”), complete line with taping heads 8 x 500 mm (19,7”), caterpillar...

concentric taping heads, pad outer ø 500 mm (19,7”), pad inner ø 76 mm (2,95”), max. 1200 rpm

for reel flange ø up to 1800 mm (70,8”), max. 6 tons

automatic couble spooler, for bobbins ø 450 and 600 mm (17,7 and 23,6”), max. speed 535 m/min...

disc ø 1000 - 5000 mm (39,4 - 197"), multispeed gearbox or DC-/AC-drive, available from...

dual overhead pay-off device for bobbins ø 400 mm (16”), 2 units available

auxiliary extruder, screw ø 45 mm (1,7”), L/D = 18,5

granulate separator

bobbin flange ø 508 mm (20"), max. 2500 m/min (8200 ft/min)

for bobbin flange ø 500 mm (19,7”), 2000 m/min (6560 ft/min)

mixer, usable content 1 m³, 2 units available

12 - 20 drums ø 2250, 2600 or 3000 mm (88, 12 or 118"), max. weight of each drum 30 tons

up to 120 bobbins ø 630 mm (25"), product ø 300 mm (11,8")

rotating pay off for steel rope, Drum ø 4000 mm (157”) x 3000 mm (118”) width, weight of...

clamping length 600 mm (23,6”), haul-off force max. 500 kg

binding head, ø 200 mm (7,8”), cops width 180 mm (7”), max. 1000 rpm, free passage 65 mm...

concentric taping head, pad ø 300 mm (12”), tape width 50 mm (2”), bore ø 80 mm (3,14”),...

binding head, i.e. for 8+8 copse to apply each 8 strings in opposite direction, copse ø 120 mm...

Kevlar serving and armouring line, to apply up to 80 Kevlar yarns, pay off ø 2600 (102”), 10...

tubular stranding line for the manufacturing of steel ropes, max. 1200 rpm., 36 bobbins ø 355 mm...

double twist pairing machine, driven double pay off for bobbins ø 22” (560 mm), take up bobbin...

bobbins ø 500 and 560 mm, speed max. 35,5 m/s

barrel outer ø 500 mm, barrel inner ø 350 mm, height 700 mm

Bow twister for stranding up to 5 or 6 insulated conductors, reel ø 2000 mm (78,7“), conductor...

HERBORN BREITENBACH, selftraversing single spooler, type SH 1250T, bobbin flange max. ø 1200 mm...

Double twist bunching machine, take up bobbin 800 mm (35,5”), max. 1000 twists/min

Rubber extruder, type 350 S, screw ø 90 mm (3 ½“)

Concentric binding head, type QBH 400, for bobbin flange ø 400 mm (11,8"), max. 250 kg

Vertical accumulator, disc ø 500 mm (19,7"), 10+11 discs, capacity approx. 60 m, product ø...

Vertical accumulator, disc ø 270 mm, 6+7 discs, capacity approx. 29 m (95ft), product ø max. 7...

Dancer accumulator, 7+8 discs, disc ø 500 mm (19,7"), groove width 40 mm (1,6")

100 steel bobbins, flange ø 315 mm (12,4"), overall width 236 mm (9,3"), barrel ø 127...

60 steel bobbins, flange ø 250 mm (9,8"), overall width 190 mm (7,5"), barrel ø 101...

BERSTORFF, extruder for thermoplastics, screw ø 60 mm (2,4“), L/D=16, 30 kW DC motor

Rotating belt type capstan RCC 6000, contact length 5200 mm (183,8”), max pulling force 6000 kg

QUEINS, heavy duty planetary stranding cage, 8 reels 2240 mm flange-ø (88”), drum weight 10...

Extruder, screw ø 120 mm (4,72”), L/D=20

Self traversing take-up, max. reel ø 2500 mm (98”), 10 t, new

Self traversing pay-off, max. reel ø 2500 mm (98”), 10 t, new

9 die double block drawing machine, slipless, mainly used for copper alloys and copper covered...

Single drawing blocks ø 525 mm (2 sets), inlet max. 15 mm ø

5 block drawing line, block ø 800 mm, for round and profiled wires, inlet 9,5 mm, finished ø...

Fine wire drawing machine, 21 dies, wire elongation 20 %, inlet max. 2,5 mm, finished ø 0,4

Fine wire drawing machine, type TF II d, 11 dies, wire elongation 24 %, inlet 2,1 mm ø, finished...

Double spooler 800 mm with accumulator, take-up bobbin ø 630 - 800 mm, take-up speed max. 25...

Die polishing machines: 6 machines make SIMON, type ESPM 2011, 6 machines make BETAMAT, 1 double...

Double head bunching machines for tire cord

Post forming device with 2 x 5 rollers for steel strands up to
ø 32 mm (1.26")

Post forming device, 5 + 5 rollers

Accumulator, capacity approx. 80 m (262.5 ft), product-ø max.
12 mm (0.47")

Decoiling unit for coils of max. outer diameter 1000 mm (39.37")

Coiling unit, flange diameter 1000 mm (39.37"), for caterpillar feeding rope

Dancer accumulator with pulling capstan

Hopper loader for granules

Deviation pulley for extrusion lines, outer ø approx. 1750 mm (68.9"), product ø approx....

Rewinding line for ø 250 mm (9.84") bobbins

Traversing unit, for take-up traversing width approx. 2000 mm (78.7")

Traversing unit for take-up, traversing width approx. 1500 mm (59")

Bridge-type pay-off for bobbins up to 2600 mm (8.5 ft) flange diameter, 15 tons

Mobile pay-off/take-up for large drums up to flange ø 5000 mm (16.4 ft), 40 tons

Single disc capstan, disc diameter 2000 mm (78.7")

Spooler for max. 800 mm (31.5") bobbins

Kevlar serving and armouring line, to apply up to 80 Kevlar yarns, pay off ø 2600 (102”), 10...

1 + 6/560 mm (22"), tube speed 1000 min-1, encircling bearings

Static coiler for bobbins 1250 mm (49.2") ø

Medium wire drawing machine for aluminium and alloy wire, inlet ø 3,0 - 4,0 mm (0,12 -...

Double twist bunching machine, 5 units, 2000 rpm = 4000 twists/min, cross section 0,5 - 6mm²...

automatic spooler for bobbin ø 630 mm (24.8"), speed max. 30 m/sec, spooling range...

approx. 4500 units braiding spools flange ø=80mm (3.15''), width 100mm...

approx. 2000 units braiding spools, flange ø=98mm (3.86''), width 100mm...

Pay-off for metal tapes, pad ø 800 mm (31.5'')

Bundle packer, wire ø 1,3 - 1,5mm (0.05 - 0.06''), speed max. 36 m/s (118 ft/s), for...

Driven pay-off for spools 400 mm (15.75'')

84-bobbin armouring planetary strander, bobbin flange ø 400 mm (15.8")

armouring line, 60 x 400 mm (15.8") + 6 + 12 x 250 mm (9.8")

rotating pay-off for reel flange ø 2500 mm (98‘‘), 10 t

rotating pay-off for reel flange ø 2500 mm (98‘‘), 10 t

pay-off, 10 tons, for reel ø 2800 mm (9.18 ft)

Triple-extrusion line for XLPE, (silan processed) PVC, PE, TPR, consisting of: self-traversing...

complete extrusion line, actually used as foaming line, for production of RF cable (radio...

cages for 6 + 12 + 18 + 24 + 30 + 36 + 42 bobbins ø 630 mm (24.8”) DIN flange, bobbin...

1 + 6/30" (762 mm), complete line

double twist buncher bobbin 630mm DIN, max. 2900 rpm = 5800 twists/min, conductors...

rigid stranding machine, complete line for 400 mm (15.75") spools

taping head for 4 pads 400 mm (15.8“), speed 900 rpm

13 paper taping heads for 16 pads each, pad ø 600 mm, speed 260 rpm

double overhead pay-off, bobbin flange ø 630 mm, incl. loading crane

belt-type capstan, contact length 1000 mm, pulling force max. 1000 N

dual belt-type capstan 2 x 1000 mm (39.4") contact length, 36-steps gearbox

spare flange motor for rod drawing machine, power 156 kWh

Fully automatic centrifugal filtration system for adaptation to aluminum rod drawing machine,...

self-traversing spooler for max. 1600mm (63") bobbins, max. reel weight 5,6t, specially...

spinner block for production of copper tubes, pulling force max. 7000 kg, incl. baskets overall...

extruder, screw ø 65 mm (2.56"), LD = 25

extruder, screw ø 90 mm (3.5"), LD = 25

extruder, screw ø 150 mm (5.9"), LD = 25

heavy duty take-up, A-shape, for reel weights up to 300 t, reel flange ø up to 7000 mm...

double disc capstan, max. pulling force 12.000 kg

belt type capstan, pulling force 800 kg, speed 100 m/min

belt type capstan, pulling force 1250 kg, speed 100 m/min

extruder, screw ø 125 mm (4.9“), L/D = 30

3 rigid stranding cages, disc-type design, 12+18+24 bobbins 457 mm Ø (18")

Contact length 4670 mm (184"), max. pull 7,5 tons

2 pads 390 - 600 mm Ø (15" - 23,6"), 400 min-1, free passsage 250 mm (10")

2 pads ø 600 mm, pad weight max. 80 kg, speed 250 rpm, free passage ø 290 mm, mobile version

clamping length 880 mm (34,6"), haul-off force max. 8 kN (800 kg), 2 units promptly available

Bobbin / cops ø 315 mm (12.4")

for jumbo-coils 500 mm (19.7") x 500 mm (19.7"), max. weight 160 kg

Portal traversing take-up for reel size 4500 mm, max. load 12,5 tons

Planetary strander with backtwist,16 bobbins, 8 bobbins-ø 800 mm with backtwist and 8 bobbins-ø...

Max. 800 twists/minute, take-up spool 1250 mm, max. bunch 50 mm², without pay-offs, without...